|
Carb
Jan 12, 2009 21:11:14 GMT -5
Post by sobeit on Jan 12, 2009 21:11:14 GMT -5
what carbs will bolt to the chevette intakes, might have a little motor work done. i thought i saw someone with a holley 500 on the chevette intake.
|
|
|
Carb
Jan 13, 2009 8:30:43 GMT -5
Post by colemanracing931 on Jan 13, 2009 8:30:43 GMT -5
talk to doc fields
|
|
|
Carb
Jan 13, 2009 10:07:31 GMT -5
Post by DOCTOR FIELDS on Jan 13, 2009 10:07:31 GMT -5
The Weber 32/36mm - 38mm, any Holley - Weber 5200, 5210, or 5220 series carb. will bolt directly to the stock intake. I've never done it, but it seems like one of the Rochester carbs will bolt on with minor carb bolt hole modifications. If i aint mistaken, i believe Racer Walsh makes an adapter plate to run a Holley 350 / 500 with the stock base. Otherwise, you would have to have an adapter fabricated. To get the most out of it, you would need to cut off the stock base plate and open up the plenum, fabricate and weld the adapter directly to the intake. In my opinion the 32/36 or 38mm Weber is the way to go. Direct bolt on, 350cfm or 490 cfm.
|
|
|
Carb
Feb 6, 2009 15:04:31 GMT -5
Post by barry3 on Feb 6, 2009 15:04:31 GMT -5
them weber work great on a chevette sobeit
|
|
|
Carb
Feb 6, 2009 17:34:39 GMT -5
Post by sobeit on Feb 6, 2009 17:34:39 GMT -5
ok ty
|
|