Post by Preston32 on Sept 14, 2009 18:16:31 GMT -5
CHEVETTE RULES FOR HIGHLAND RIM
1. No spotter radios permitted.
3.Raceceiver or scanner for Channel 890 or on FREQUENCY (461-1125) OK
4. Fire suit and SA 95 or newer helmet required.
BODIES
1.Stock wheelbase as manufactured.
2.All flammable materials inside car must be removed.
3.All glass must be removed, i.e. door glass, headlights, etc.
4.Windshield or mesh wire screen mandatory. Factory glass replacement or LEXAN.
NO PLEXIGLASS.
5.Bodies must remain stock appearing and neat at all times.
Numbers: minimum 20" on doors and 24" on roof. Must be able to read from drivers side.
NO SPRAY PAINTED NUMBERS.
6.Plastic or rubber nose pieces allowed.
7.Rear spoiler okay. 6" maximum height. in-forced
INTERIOR
1.Aluminum racing seat MANDATORY.
2.Must have minimum 3" wide shoulder harness.
3.Must have minimum 2 pound fire extinguisher with a gauge and quick release mounted
securely in car within reach of driver while belted in.
4.Left side window net required. Must have quick release that releases from top..
5.All other side windows and door openings must remain open. in-forced
6.Battery must be enclosed in a safe manner and approved by Competition Director.
7.Interior enclosures are allowed, but must have inspection ports.
8.Interior must be complete and shield driver from fuel cell, ground, and engine compartment.
ROLL CAGE AND CHASSIS
1.All roll cages must be approved by Competition Director.
2.Stock frame, as manufactured.
3.Fuel cell must be enclosed and mounted in a safe manner. Must be approved by
Competition Director.
4.MUST run Riverview Speedway fuel.
SUSPENSION
1.All must be in stock location.
2.NON-Adjustable Sway Bar/Pan-hard Bar MUST BE IN STOCK LOCATION.
3.A-arms may be modified. NO tubular A-arms.
4.Stock steering, as manufactured.
5. NON ADJUSTABLE SUSPENSION.
6. NON ADJUSTABLE Racing Springs and Shocks ALLOWED. ( $50.00 Claimer Each )
TRANSMISSION
1.Chevette factory transmission ONLY. (NO FORD TRANNY'S)
2. NO Aluminum Flywheel.
3. Flywheel Must NOT be milled thinner than Ring Gear.
ENGINE
1.All engine parts must be original equipment before modifications.
2.Cam shaft is optional.
3.No strokers.(IN-FORCED)
4.Stock crank and rods.(IN-FORCED)
5.Iron motor only.
6.Wet sump oil system only.
7. MAX BORE .060 (IN-FORCED)
8. MAY use FACTORY Flat Top or Dish Pistons. (MAX .060)
CARBURETOR
1.Any carburetor that will bolt to a stock Chevette intake. NO SPACER PLATES
AIR INTAKE
1.Air cleaner can protrude through hood no more than 4 inches.
FUEL SYSTEMS
1.No electric fuel pumps.
COOLING SYSTEM
1.Aluminum racing radiators are allowed.
2.NO antifreeze in radiator. $200 fine if caught using antifreeze.
This will be strictly enforced.
DIFFERENTIAL
1.Chevette factory differentials ONLY.
2.ANY CHEVETTE REAR END ONLY (IN-FORCED)
3. 4.11s are allowed.
4. Rear Differential MAY be Welded or have a Spool. (NO RATCHETS)
BRAKES
1.Brakes on all four wheels must be functional.(in-forced) and checked before race
EXHAUST
1.Headers are allowed.
2.Exhaust must exit behind driver.
3.100 dba will be enforced.
TIRES AND WHEELS
1.Any DOT tire 50, 60, or 70 series allowed.
2.NO V, VR, Z or ZR rated tires.
3.Steel wheels ONLY. Any offset allowed.
4.13 inch X 7" or 8" wheels only.
WEIGHT
1.Minimum weight is 1950 pounds.
2. MAX 55% Left Side Weight.
PROTEST
1. $150.00 To pull oil pan covers the hole motor from top to bottom $150 to check suspension from top to bottom
1. No spotter radios permitted.
3.Raceceiver or scanner for Channel 890 or on FREQUENCY (461-1125) OK
4. Fire suit and SA 95 or newer helmet required.
BODIES
1.Stock wheelbase as manufactured.
2.All flammable materials inside car must be removed.
3.All glass must be removed, i.e. door glass, headlights, etc.
4.Windshield or mesh wire screen mandatory. Factory glass replacement or LEXAN.
NO PLEXIGLASS.
5.Bodies must remain stock appearing and neat at all times.
Numbers: minimum 20" on doors and 24" on roof. Must be able to read from drivers side.
NO SPRAY PAINTED NUMBERS.
6.Plastic or rubber nose pieces allowed.
7.Rear spoiler okay. 6" maximum height. in-forced
INTERIOR
1.Aluminum racing seat MANDATORY.
2.Must have minimum 3" wide shoulder harness.
3.Must have minimum 2 pound fire extinguisher with a gauge and quick release mounted
securely in car within reach of driver while belted in.
4.Left side window net required. Must have quick release that releases from top..
5.All other side windows and door openings must remain open. in-forced
6.Battery must be enclosed in a safe manner and approved by Competition Director.
7.Interior enclosures are allowed, but must have inspection ports.
8.Interior must be complete and shield driver from fuel cell, ground, and engine compartment.
ROLL CAGE AND CHASSIS
1.All roll cages must be approved by Competition Director.
2.Stock frame, as manufactured.
3.Fuel cell must be enclosed and mounted in a safe manner. Must be approved by
Competition Director.
4.MUST run Riverview Speedway fuel.
SUSPENSION
1.All must be in stock location.
2.NON-Adjustable Sway Bar/Pan-hard Bar MUST BE IN STOCK LOCATION.
3.A-arms may be modified. NO tubular A-arms.
4.Stock steering, as manufactured.
5. NON ADJUSTABLE SUSPENSION.
6. NON ADJUSTABLE Racing Springs and Shocks ALLOWED. ( $50.00 Claimer Each )
TRANSMISSION
1.Chevette factory transmission ONLY. (NO FORD TRANNY'S)
2. NO Aluminum Flywheel.
3. Flywheel Must NOT be milled thinner than Ring Gear.
ENGINE
1.All engine parts must be original equipment before modifications.
2.Cam shaft is optional.
3.No strokers.(IN-FORCED)
4.Stock crank and rods.(IN-FORCED)
5.Iron motor only.
6.Wet sump oil system only.
7. MAX BORE .060 (IN-FORCED)
8. MAY use FACTORY Flat Top or Dish Pistons. (MAX .060)
CARBURETOR
1.Any carburetor that will bolt to a stock Chevette intake. NO SPACER PLATES
AIR INTAKE
1.Air cleaner can protrude through hood no more than 4 inches.
FUEL SYSTEMS
1.No electric fuel pumps.
COOLING SYSTEM
1.Aluminum racing radiators are allowed.
2.NO antifreeze in radiator. $200 fine if caught using antifreeze.
This will be strictly enforced.
DIFFERENTIAL
1.Chevette factory differentials ONLY.
2.ANY CHEVETTE REAR END ONLY (IN-FORCED)
3. 4.11s are allowed.
4. Rear Differential MAY be Welded or have a Spool. (NO RATCHETS)
BRAKES
1.Brakes on all four wheels must be functional.(in-forced) and checked before race
EXHAUST
1.Headers are allowed.
2.Exhaust must exit behind driver.
3.100 dba will be enforced.
TIRES AND WHEELS
1.Any DOT tire 50, 60, or 70 series allowed.
2.NO V, VR, Z or ZR rated tires.
3.Steel wheels ONLY. Any offset allowed.
4.13 inch X 7" or 8" wheels only.
WEIGHT
1.Minimum weight is 1950 pounds.
2. MAX 55% Left Side Weight.
PROTEST
1. $150.00 To pull oil pan covers the hole motor from top to bottom $150 to check suspension from top to bottom