Post by Preston32 on Feb 3, 2010 1:08:49 GMT -5
1. GENERAL
A stock Chevette; can put a set of stock wheels on & also race in the Rim Runners division.
No spotter radios permitted.
Fire suit and SA 95 or newer helmet required.
2. BODIES
Stock wheelbase as manufactured.
All flammable materials inside car must be removed.
All glass must be removed, i.e. door glass, headlights, etc.
Windshield or mesh wire screen mandatory. Factory glass replacement or LEXAN.
NO PLEXIGLASS.
Bodies must remain stock appearing and neat at all times.
Numbers: minimum 20" on doors and 24" on roof. Must be able to read from driver’s side.
NO SPRAY OR PAINTED NUMBERS.
Plastic or rubber nose pieces allowed.
Rear spoiler okay. 6" maximum height.
3. INTERIOR
Aluminum racing seat MANDATORY.
Must have minimum 3" wide shoulder harness.
Must have minimum 2 pound fire extinguisher with a gauge and quick release mounted securely in car within reach of driver while belted in.
Left side window net required. Must have quick release that releases from top...
All other side windows and door openings must remain open.
Battery must be enclosed in a safe manner and approved by Competition Director.
Interior enclosures are allowed, but must have inspection ports.
Interior must be complete and shield driver from fuel cell, ground, and engine compartment.
4. ROLL CAGE AND CHASSIS
All roll cages must be approved by Competition Director.
Stock frame, as manufactured.
Fuel cell must be enclosed and mounted in a safe manner. Must be approved by
Competition Director.
MUST run Riverview Speedway fuel.
5. SUSPENSION
All must be in stock location.
NON-Adjustable Sway Bar/Panhard Bar MUST BE IN STOCK LOCATION.
A-arms may be modified. NO tubular A-arms.
Stock steering, as manufactured.
NON ADJUSTABLE SUSPENSION.
NON ADJUSTABLE Racing Springs and Shocks ALLOWED. ( $50.00 Claimer Each )
6. TRANSMISSION
Chevette factory transmission ONLY.
NO Aluminum Flywheel.
Flywheel Must NOT be milled thinner than Ring Gear.
7. ENGINE
All engine parts must be original equipment before modifications.
Cam shaft is optional.
No strokers.
Stock crank and rods.
Iron motor only.
Wet sump oil system only.
MAX BORE .060
MAY use FACTORY Flat Top or Dish Pistons. (MAX .060)
8. CARBURETOR
Any carburetor that will bolt to a stock Chevette intake.
9. AIR INTAKE
Air cleaner can protrude through hood no more than 2 inches.
10. FUEL SYSTEMS
No electric fuel pumps.
11. COOLING SYSTEM
Aluminum racing radiators are allowed.
NO antifreeze in radiator. $200 fine if caught using antifreeze.
This will be strictly enforced.
12. DIFFERENTIAL
Chevette factory differentials ONLY.
3.36 3.70 or 4.11 gear ratio ONLY.
4.11 ratios allowed.
Rear Differential MAY be Welded or have a Spool. (NO RATCHETS)
13. BRAKES
Brakes on all four wheels must be functional.
14. EXHAUST
Headers are allowed.
Exhaust must exit behind driver.
100 dba will be enforced.
15. TIRES AND WHEELS
Any DOT tire 50, 60, or 70 series allowed.
NO V, VR, Z or ZR rated tires.
Steel wheels ONLY. Any offset allowed.
13 inch X 7" or 8" wheels only.
16. WEIGHT
Minimum weight is 1950 pounds.
MAX 55% Left Side Weight.
A stock Chevette; can put a set of stock wheels on & also race in the Rim Runners division.
No spotter radios permitted.
Fire suit and SA 95 or newer helmet required.
2. BODIES
Stock wheelbase as manufactured.
All flammable materials inside car must be removed.
All glass must be removed, i.e. door glass, headlights, etc.
Windshield or mesh wire screen mandatory. Factory glass replacement or LEXAN.
NO PLEXIGLASS.
Bodies must remain stock appearing and neat at all times.
Numbers: minimum 20" on doors and 24" on roof. Must be able to read from driver’s side.
NO SPRAY OR PAINTED NUMBERS.
Plastic or rubber nose pieces allowed.
Rear spoiler okay. 6" maximum height.
3. INTERIOR
Aluminum racing seat MANDATORY.
Must have minimum 3" wide shoulder harness.
Must have minimum 2 pound fire extinguisher with a gauge and quick release mounted securely in car within reach of driver while belted in.
Left side window net required. Must have quick release that releases from top...
All other side windows and door openings must remain open.
Battery must be enclosed in a safe manner and approved by Competition Director.
Interior enclosures are allowed, but must have inspection ports.
Interior must be complete and shield driver from fuel cell, ground, and engine compartment.
4. ROLL CAGE AND CHASSIS
All roll cages must be approved by Competition Director.
Stock frame, as manufactured.
Fuel cell must be enclosed and mounted in a safe manner. Must be approved by
Competition Director.
MUST run Riverview Speedway fuel.
5. SUSPENSION
All must be in stock location.
NON-Adjustable Sway Bar/Panhard Bar MUST BE IN STOCK LOCATION.
A-arms may be modified. NO tubular A-arms.
Stock steering, as manufactured.
NON ADJUSTABLE SUSPENSION.
NON ADJUSTABLE Racing Springs and Shocks ALLOWED. ( $50.00 Claimer Each )
6. TRANSMISSION
Chevette factory transmission ONLY.
NO Aluminum Flywheel.
Flywheel Must NOT be milled thinner than Ring Gear.
7. ENGINE
All engine parts must be original equipment before modifications.
Cam shaft is optional.
No strokers.
Stock crank and rods.
Iron motor only.
Wet sump oil system only.
MAX BORE .060
MAY use FACTORY Flat Top or Dish Pistons. (MAX .060)
8. CARBURETOR
Any carburetor that will bolt to a stock Chevette intake.
9. AIR INTAKE
Air cleaner can protrude through hood no more than 2 inches.
10. FUEL SYSTEMS
No electric fuel pumps.
11. COOLING SYSTEM
Aluminum racing radiators are allowed.
NO antifreeze in radiator. $200 fine if caught using antifreeze.
This will be strictly enforced.
12. DIFFERENTIAL
Chevette factory differentials ONLY.
3.36 3.70 or 4.11 gear ratio ONLY.
4.11 ratios allowed.
Rear Differential MAY be Welded or have a Spool. (NO RATCHETS)
13. BRAKES
Brakes on all four wheels must be functional.
14. EXHAUST
Headers are allowed.
Exhaust must exit behind driver.
100 dba will be enforced.
15. TIRES AND WHEELS
Any DOT tire 50, 60, or 70 series allowed.
NO V, VR, Z or ZR rated tires.
Steel wheels ONLY. Any offset allowed.
13 inch X 7" or 8" wheels only.
16. WEIGHT
Minimum weight is 1950 pounds.
MAX 55% Left Side Weight.
