|
Post by mdmicon on Jun 16, 2010 13:35:37 GMT -5
Here is a stupid question. What belt do we run on our race cars for a fan/waterpump belt? I think its a 26.5 inch belt but if you don't have a car model name or part number at Auto Zone they are clueless.
|
|
|
Post by colemanracing931 on Jun 17, 2010 10:39:50 GMT -5
hey dave i went to napa and got a 27 inch belt was too big, this is what i bought from napa part number 257260. which on the back of box it reads 13/32" x 26-5/8"... hope this helps you, i just did this last night.
|
|
|
Post by mdmicon on Jun 17, 2010 11:01:49 GMT -5
I have a 27 inch on it now and it works but real sloppy. I have been having some heating issues that i haven't had before and I'm wondering if this belt slipping isn't the cause. I tried a 26 inch and its way to short so thats how I came to think its a 26.5.
|
|
|
Post by colemanracing931 on Jun 17, 2010 14:42:18 GMT -5
the one i mentioned is a perfect fit man. i listed part number and measurements that were on box 4 ya.
|
|
|
Post by colemanracing931 on Jun 17, 2010 14:43:28 GMT -5
the one u had is the one i returned was very sloppy, but worked, id worry bout it slippin off
|
|
|
Post by mdmicon on Jun 17, 2010 15:44:36 GMT -5
thanks
|
|
|
Post by colemanracing931 on Jun 17, 2010 21:18:15 GMT -5
let me know if it works for you too
|
|
|
Post by colemanracing931 on Jun 21, 2010 8:20:04 GMT -5
well?
|
|
|
Post by mdmicon on Jun 21, 2010 9:19:31 GMT -5
I couldn't get it on. Would not even roll on. I could use a pry bar I'm sure but then seems as if it would be too tight
|
|
|
Post by colemanracing931 on Jun 21, 2010 11:41:52 GMT -5
hmmm well im not sure mine worked.
|
|