|
Post by DOCTOR FIELDS on Aug 21, 2010 23:44:07 GMT -5
I have a new .030" over block that was assembled but never raced. The guy assembled it with dome pistons, the pistons hit the head and mashed the rings tight in the grooves. The cylinders could use a quick hone to break what little glaze there is from cranking it over. The block has also been decked, but i do not know how much.
Also got a std / std crankshaft that was used in the above block. The journals need to be polished. I have a set of std. rod bearings that i'll throw in with it.
$100
Can assemble as a complete short block if interested. PM me for more information.
|
|
|
Post by boosted79 on Aug 21, 2010 23:59:36 GMT -5
how much for assembly and all im in ohio and could come down to get on a weekend, want more specs on this thing if you got it if not no big deal just let me know im trying to figure out what im doing and the direction im going with my build up
|
|
|
Post by DOCTOR FIELDS on Aug 22, 2010 0:55:44 GMT -5
I can build this bottom end 2 ways:
- .030" over - Flat top pistons - Premium rings - Zero deck height - Reconditioned rods - New rod bolts - New oil pump - New rod and main bearings - Complete gasket set - All clearances checked and set - Fully assembled
$750
or
$825 with Total Seal gapless rings
|
|
|
Post by DOCTOR FIELDS on Aug 22, 2010 16:05:40 GMT -5
btt
|
|
|
Post by barry3 on Aug 25, 2010 21:58:28 GMT -5
field is good built motor buddy
|
|
|
Post by boosted79 on Aug 27, 2010 20:27:49 GMT -5
d**n the luck i have i was going to make a trip and get this but life is in the way again and the money just aint there, but it sounds like a great deal man, if somthing changes and its still an option im getting ahold of you but man someone needs to jump on this, lol
|
|
|
Post by DOCTOR FIELDS on Sept 8, 2010 11:39:09 GMT -5
Make me a reasonable offer on this, i need the space and extra cash. Also got a stock 7" flywheel (small clutch) with almost new clutch disc and pressure plate. $50 OBO No reasonable offers refused!
|
|