Post by DOCTOR FIELDS on May 7, 2007 19:36:40 GMT -5
I'm cleaning out everything Chevette, hopefully for the last time.. lol I've done this twice before, and somehow end up with more than what i got rid of!?!?!
Here's what i have.
- 8 Cam Carriers w/ Covers
- 5 Stock Distributors
- 1 Brand New Distributor
- 7 Blocks - 4 are stock short blocks - 1 is complete stock - cracked head - no intake. 1 has been bored .020" but is rusted - 1 is .040" decked .040" needs reboring.
- 1 Split Manifold SOLD
- 2 - 8” Flywheels
- 1 - 7” Flywheel
- Misc. Pistons / Rods / Pulleys all stock
- 2 - 2 barrel intakes
- 1 - 185/60/13 Falken tire on 4” backspacing wheel - both good
- Closed Chambered racing head shaved .100”- mild porting and polishing - needs valve job. Has intake valves in both sides. Done by Tim Hartley @ K&J in 2003. Can complete head for the right price.
- 1 Open Chambered 1.6 head - Port work started on intake side, not finished - stock thickness never been shaved - will finish port work and do valve job, mill, etc for the right price. SOLD
- 1 MSD 6A ignition box and harness. SOLD
EVERYTHING IS GONE!
Here's what i have.
- 5 Stock Distributors
- 1 Brand New Distributor
- 7 Blocks - 4 are stock short blocks - 1 is complete stock - cracked head - no intake. 1 has been bored .020" but is rusted - 1 is .040" decked .040" needs reboring.
- 1 - 7” Flywheel
- Misc. Pistons / Rods / Pulleys all stock
- 2 - 2 barrel intakes
- 1 - 185/60/13 Falken tire on 4” backspacing wheel - both good
- Closed Chambered racing head shaved .100”- mild porting and polishing - needs valve job. Has intake valves in both sides. Done by Tim Hartley @ K&J in 2003. Can complete head for the right price.
EVERYTHING IS GONE!
