|
Post by DOCTOR FIELDS on Feb 9, 2008 19:52:06 GMT -5
I'm looking for a complete stock Chevette engine, perferably with an open chambered head. Something ready to bolt in or minor rebuild, no major overhauls. Also need a good 4 speed transmission with mount. This is going into a project car my dad has. 1979 MG Midget. It was going to cost $2000 to rebuild the stock MG engine. Parts are rediculous. We think we can fit a Chevette engine and tranny down in it ALOT cheaper.
|
|
|
Post by BILLYTN30 on Feb 9, 2008 21:07:16 GMT -5
Stephen I checked with Oreilly auto parts not long ago and they can get a short block for $700.00 with a 3 year warranty.
|
|
|
Post by BILLYTN30 on Feb 9, 2008 21:09:17 GMT -5
I probably have a good 4 speed for $75.00 if you still need one. Im sure you have a head and cam to put on it...
|
|
mike9
Slighty Modified
Posts: 65
|
Post by mike9 on Feb 9, 2008 21:10:49 GMT -5
i think we may have one of the good heads
|
|
|
Post by hodge711 on Feb 9, 2008 21:44:20 GMT -5
i got a short block
|
|
|
Post by DOCTOR FIELDS on Feb 9, 2008 23:05:40 GMT -5
I don't have ANY chevette parts left. I'll tell him about the transmission Billy.
How much for the head and short block? (Mike / Hodge)
|
|
|
Post by barry3 on Feb 10, 2008 11:17:01 GMT -5
i got a head
|
|
|
Post by barry3 on Feb 10, 2008 17:30:35 GMT -5
i got a 395 head
|
|
|
Post by hodge711 on Feb 10, 2008 18:52:12 GMT -5
id say prolly $100 bucks
|
|
|
Post by jeffries on Feb 11, 2008 9:17:10 GMT -5
i have a complete stock engine that ran when it was taken out, needs cleaned up its kinda oily
|
|