|
Post by hydroli on May 23, 2008 12:41:05 GMT -5
Looking for good shape fan clutch that will fit the chevette engine.
Thanks!
Olivier
|
|
|
Post by hydroli on May 23, 2008 12:44:01 GMT -5
...or if someone could let me know a light weight model that would fit there, I'd prefer a clean part though.
|
|
|
Post by rad15E on May 23, 2008 17:33:50 GMT -5
it doesn't have to be for a chevette to work ,chevy only has two bolt patterns ,small for the older models and the large for the newer ,a fan from a v8 will work depending on the water pump you have
|
|
|
Post by hydroli on May 23, 2008 20:07:56 GMT -5
Ok thanks for the info. I'm looking for a smaller substitute cause the v8 one seems quite big.. but I keep it in mind in my research. Thanks
Olivier
|
|
|
Post by toymaster on May 24, 2008 8:19:08 GMT -5
hey oliver i just pulled a clutch fan off a 87 1.6 $20 plus shipping
|
|
|
Post by hydroli on May 24, 2008 8:36:49 GMT -5
Hi, can you send me a pic please? If it looks like what I need I'll take it. Thanks.
Olivier
|
|
|
Post by hydroli on May 24, 2008 11:34:07 GMT -5
I just looked at my new flex-lite fan and considering the way a clutch holds the fan, it can't fit on any existing clutch since bolt pattern of the fan tends to be bigger than the water pump one. I'm still interested on your clutch toymaster but it would have to be an original chevette clutch.. don't know if it exists. And if so, I will take the fan that goes on it too. Let me know if the clutch/fan is from a chevette please.
Olivier
|
|
|
Post by toymaster on May 25, 2008 12:47:38 GMT -5
yep origional equip on a 87 chevette
|
|
|
Post by hydroli on May 25, 2008 20:22:39 GMT -5
Ok, I'll take it. Go see your pv I sent you my adress so you can give me the shipping. Is it for both, the clutch and the fan?
|
|